BMW ISTA ISPI NEXT Licence Generator (You can use it to create licences for offline ISPI ISTA) - $350
BMW ISTA ISPI NEXT 4.49.40 (1 Tb) - $150
BMW ISTA ISPI NEXT 4.49.40 (1 Tb) - $150
BMW ISTA ISPI NEXT
Functions that will be available after installing the BMW ISTA D: automatic troubleshooting, reading / resetting errors, resetting service reminders, ECU adaptations, setting basic parameters, viewing measurement blocks, coding control units, information about control units, performer tests, programming units, other functions.
List of programs included: BMW ISTA D, BMW ISTA-P, BMW Inpa, NCSEXPERT, WinKFP, Ediabus Conf, BMW ETK, NCS Dummy, BMW Coding Tool, Dr.Gini, ESYS Plus (additional option).
System requirements for BMW Ista:
• Laptop with at least i5/i7 processor
• RAM of at least 8 GB, but 16 GB and above is highly desirable.
• Availability of an SSD disk with a capacity of at least 1 TB, for Esis you need 2 TB
• Support Windows 10/11 x64 PRO
• RAM of at least 8 GB, but 16 GB and above is highly desirable.
• Availability of an SSD disk with a capacity of at least 1 TB, for Esis you need 2 TB
• Support Windows 10/11 x64 PRO
Some features of the ISTA system:
• It may not work completely with cars before 2014, it may not decipher fault codes or delete them, etc. This is due to the fact that the manufacturer removes support for old cars in new software versions. Therefore, for such cars we can install an older version.
• The system license is tied to the hardware and is protected from cloning. If deployed and run on another laptop, the license of the first one will be blocked. License restoration is equal to the cost of installation as for the first time.
• The system license is tied to the hardware and is protected from cloning. If deployed and run on another laptop, the license of the first one will be blocked. License restoration is equal to the cost of installation as for the first time.